Plasticizer for Thermal Insulation Systems 1 l Anti-Freeze

The "Anti-Freeze" plasticizer for thermal insulation systems is a special anti-freeze plasticizer used to modify the properties of dry mixes. It allows for the insulation of building facades with foam, extruded polystyrene, and mineral wool during the spring-autumn period and in the event of possible temperature drops.
The "Anti-Freeze" plasticizer (produced by Plast-Bet) maintains the qualities of adhesive mixes when there are temperature differences ranging from 0°C to -8°C, accelerates the hardening time of adhesive mixes, and reduces the crystallization temperature of water. It enables achieving the minimum necessary initial hardness and increases the final hardness of the finish surface, while also increasing density and impermeability.
The Plast-Bet plasticizer for thermal insulation systems should be added directly to the adhesive mix along with the water.
The "Anti-Freeze" plasticizer should be used at a ratio of 0.5 liters per 25 kg of adhesive mix.