Dry mix MOHOLIT 30 kg SUPRATEN

Dry mix MOHOLIT 30 kg SUPRATEN — is a universal gypsum-based plaster for manual application, designed specifically for professionals in finishing works: painters, foremen, painting and plastering crews. This gypsum-based material with rheological agents and plasticizers allows for quick and high-quality leveling of interior walls and ceilings, minimizing time on additional operations. For you who work daily with paints and plasters, MOHOLIT simplifies the process: high adhesion ensures reliable bonding even on challenging substrates, enhanced plasticity makes application easy and even, and the "breathable" structure maintains indoor microclimate, crucial for subsequent painting or wallpapering. The material saves your time — often no need for additional puttying, speeding up project delivery and reducing crew costs.
Key Properties and Benefits for Professionals

High Adhesion: Excellent grip on mineral substrates (concrete, brick, limestone, AAC blocks, aerated concrete, gypsum blocks, Fortan-type), minimizes delamination risk — ideal for large-scale jobs.
Enhanced Plasticity: Mix applies and levels smoothly, doesn't slump, simplifying crew work even at heights or in hard-to-reach areas.
Breathable Surface: Maintains vapor permeability, preventing condensation and mold — important for spaces with later acrylic or latex painting.
No Additional Puttying Needed: In most cases, surface is ready for paint or wallpaper right after smoothing, cutting work stages and saving up to 20-30% time for your team.
Eco-Friendly and Safe: Non-toxic, no harmful emissions — comfortable for working in enclosed spaces without extra ventilation.
Impact Resistance and Durability: Finished surface withstands mechanical stress, valuable for high-traffic sites.

Technical Specifications

Base: Gypsum with fillers, rheological and plasticizing additives.
Density: About 800-1000 kg/m³ (ready mortar).
Consumption: 8-10 kg/m² at 10 mm layer thickness — allows precise material calculation for crew on site.
Layer Thickness: Minimum — 2 mm, optimal — 10-15 mm; max per pass — up to 30 mm.
Mortar Life Time: 30-40 minutes — enough for continuous small crew work.
Shelf Life: 6 months in intact packaging.
Packaging: 30 kg bag — convenient for transport and site storage.

Surface Preparation (Recommendations for Foremen)
For optimal results, surface must be dry, solid, clean, and free of adhesion-hindering substances (fats, dust, bitumen). Absorbent surfaces (brick, AAC) prime with SUPRATON, SUPRATON EXTRA, or TUFFUHGPUHT to reduce consumption and improve adhesion. Non-absorbent (concrete) — with BETOHGPUHT. This prevents premature drying and cracks, saving time on rework.
Mixing Instructions (Guide for Painters)
For a 30 kg bag, use 6-9 liters of clean cold water (ratio 0.2-0.3 L/kg). Sprinkle material evenly into water container and mix with low-speed drill mixer. After 5 minutes, mix again to homogeneous lump-free mass. Ready mortar is plastic, non-slumping — perfect for hand application. Use only clean vessels and tools to avoid contamination.
Application (Guidance for Painting Crews)
Apply mortar evenly with trowel or spatula, leveling with a straightedge. For multi-layer on uneven surfaces, notch "swallowtail" shapes on first unset layer. After setting starts (20-30 min), lightly moisten surface, rub with sponge float, and smooth with stainless trowel. "Polishing" method yields smooth surface ready for paint without putty. For high-quality painting, additionally putty with EUROFIN, FINITO, or analogs. Work at +5...+25°C in dry spaces — ensures even drying without cracks.
Drying Time and Finishing
Drying: 2-10 days depending on thickness, temperature, humidity. Optimal at +10°C with good ventilation, no drafts. Avoid strong heaters — may cause cracks. After drying, surface ready for painting, wallpaper, or decorative coatings.
Safety and Working Conditions
Work in dry spaces at +5...+25°C. Mix is non-flammable, but avoid eye/skin contact — use gloves and goggles. For dust inhalation, provide ventilation. Quality guaranteed only following tech sheet — key for foremen to avoid claims.
Storage
Store in original intact bags on wooden pallets in dry, sun-protected places. Shelf life — 6 months. Convenient for painting crew warehouses.
MOHOLIT — a reliable choice for pros who value speed, quality, and savings. With it, your crew will complete more projects without compromises!