_category-thumb.webp "Solvents")
Alkyd enamel PF-115 light white 0,8 kg Palitra
Easy to apply. Convenient to work
Glossy
High weather resistance
High adhesion
Vibrant color
The composition of PF-115 enamel includes alkyd varnish, siccative, solvent, titanium dioxide
Economy
SKU CG250208
EAN 4841498007159
In stock
Hint In Stock
53,00 MDL
0,08 pack.
Application
Brush, Roller, Spray gun
Compound
Alkyd varnish
Consumption in one layer
100-180 gr/m2
Drying Time (Full)
24 hours
Execution of works
For machine and manual application
Field of use
Interior, Outdoor
Operating temperature
From +5°C
Surface type
Concrete, Metal, Wood
Weight
0,8 kg
Show more
Show less
PF-115 Palitra Enamel is intended for painting metal, concrete, wooden, and other surfaces used in atmospheric conditions and indoors.
The coating of PF-115 enamel protects the surface from atmospheric influences, is resistant to water, oils, and detergents. The coating has good gloss and durability.
The drying time for each layer of enamel at a temperature of (20±2)°C is 24 hours. When the ambient temperature decreases, the drying time increases.
The consumption of PF-115 Palitra enamel for a single-layer coating is 100-180 g/m².
If necessary, add white spirit to achieve a suitable consistency for application, but no more than 10% of the enamel’s weight. After thorough mixing, the enamel should be applied with a brush, roller, or by spraying.
The surfaces to be painted must be pre-cleaned from dust, grease, and other contaminants.
The composition of PF-115 Palitra enamel includes alkyd varnish, siccative, solvent, titanium dioxide, and pigments.
