_category-thumb.webp "Decorative paints")
Hammer effect paint brown 0,75 l Farbis
The 3-in-1 paint with a hammered effect is intended for obtaining textured coatings
Premium
SKU CG201607
EAN 4841498008743
In stock
Hint In Stock
150,00 MDL
0,17 pack.
Base material
Modified alkyd resin
Consumption
8-12 m² per 1 liter
Surface type
Metal, stainless steel
Volume
0,75 l
0.00
The 3-in-1 Farbis paint with a hammered effect is designed to create textured coatings on various surfaces, both new and previously painted metal ones. It provides a decorative "hammered metal" effect that masks metal imperfections.
The Farbis hammered effect paint is used for painting metal structures, equipment parts and mechanisms, doors, shelves, railings, poles, metal furniture (cabinets, safes), as well as other metal products and constructions.
The 3-in-1 Farbis paint dries quickly, allowing multiple coats to be applied in a single day. It is nearly invisible in retouched areas in case of damage to the main paint layer. It has a water-repellent effect and excellent adhesion to untreated metal surfaces.
Before use, the paint must be thoroughly mixed. If necessary, it can be diluted with Farbis F-6 solvent. It is applied with a brush or roller in 2-3 thin layers. When using a brush or roller, the paint can be diluted up to 5% of the total mass.
Composition: Modified alkyd resin, pigments, solvent, special additives.
Drying time: "Touch dry" – 15-30 minutes, fully dry – 3 hours, fully cured – 24 hours.
Consumption: Up to 8 square meters per 1 liter. The 3-in-1 Farbis paint is packaged in metal buckets with volumes ranging from 0.75 to 2.5 liters.
