Adhesion Primer for concrete 1,4 kg Coloris

Coloris Adhesion Primer for Low Absorbent Surfaces is used for interior and exterior works and is designed for the preliminary preparation of dense surfaces with low moisture absorption: monolithic concrete, massive concrete ceilings, concrete blocks, bricks, cement-based plasters, decorative elements made of artificial materials, as well as tiles or previously painted surfaces with coatings that cannot be completely removed. The product improves adhesion for subsequent finishing layers (paint, plaster, coatings, adhesives, new ceramic tiles, etc.).

The Grund Betonkontakt primer contains fine quartz sand, which gives the primed surface a rough texture, significantly increasing the adhesion of decorative materials to the substrate. It simplifies finishing works, including the application of plasters, putties, adhesives, and other finishing materials.

It is recommended to clean the surface of dust, dirt, oil stains, and grease. Previously painted surfaces should be cleaned of poorly adhered paint and lime layers. Hard and glossy surfaces that are well fixed should be sanded until they become matte, and the dust from sanding should be removed.

The drying time of one layer at a temperature of +20°C is 3 hours. For best results, it is recommended to apply the next layer after 24 hours.

The consumption of Coloris Grund Betonkontakt primer for one layer is 150-250 g/m². Composition: latex dispersion, quartz sand. The Adhesion Primer for Low Absorbent Surfaces Grund Betonkontakt is packed in plastic buckets with weights ranging from 1.4 to 14 kg.